Logo

  1. Home
  2. /Product
  3. /7310MKII Auto Start
7310MKII Auto Start
7310MKII Auto Start

7310MKII Auto Start

Auto Start Control Module

The DSE7310MKII is a powerful, new-generation auto start genset control module with a highly sophisticated level of new features and functions, presented in the usual DSE user-friendly format. Suitable for a wide variety of single, diesel, or gas Gen-set applications. 

OVERALL SIZE
245 mm x 184 mm x 51 mm (9.6" x 7.2" x 2.0")
PANEL CUTOUT SIZE
220 mm x 160 mm (8.7" x 6.3")
MAXIMUM PANEL THICKNESS
8.0 mm (0.3")
PRODUCT VARIANTS
7310-03 - 7310 MKII Autostart Control Module

Request a quote
m DATA SHEET
n Operators Manual
o PC Software / Software Manual
  • The DSE7310 MKII is an Auto Start Control Module and the DSE7320 MKII is an Auto Mains (Utility) Failure Control Module suitable for a wide variety of single, diesel or gas, gen-set applications.
  • Monitoring an extensive number of engine parameters, the modules will display warnings, shutdown, and engine status information on the back-lit LCD screen, illuminated LEDs, remote PC, and via SMS text alerts (with external modem).
  • The DSE7320 MKII will also monitor the mains (utility) supply. The modules include USB, RS232, and RS485 ports as well as dedicated DSENet® terminals for system expansion.
  • Both modules are compatible with electronic (CAN) and non-electronic (magnetic pick-up/alternator sensing) engines and offer an extensive number of flexible inputs, outputs, and extensive engine protections so the system can be easily adapted to meet the most demanding industry requirements.
  • The extensive list of features includes enhanced event and performance monitoring, remote communications & PLC functionality. Dual mutual standby is now available on both the DSE7310 MKII & DSE7320 MKII using RS232 or RS485 communications. This provides for a simpler and more convenient installation with more advanced features such as true engine hours balancing.
  • The modules can be easily configured using the DSE Configuration Suite PC software. Selected front-panel editing is also available.

KEY FEATURES

  • Configurable power-up mode
  • MPU fail delay
  • Enhanced graphical user interface
  • Drag & drop advanced PLC editor
  • MSC ID within PLC GenComm override
  • 4-Line back-lit LCD text display
  •  Multiple Display Languages
  • Five key menu navigation
  • LCD alarm indication
  • A heated display option is available
  • Customizable power-up text and images
  • • DSENet expansion compatibility
  • Data logging facility
  • Internal PLC editor
  • Protections disable feature
  • Fully configurable via PC using USB, RS232 & RS485 communication
  • Front panel configuration with PIN protection
  • Power save mode 
  • 3-phase generator sensing and protection
  • 3-phase mains (utility) sensing and protection (DSE7320 MKII only)
  • Automatic load transfer control (DSE7320 MKII only)
  • Generator current and power monitoring (kW, kvar, kVA, pf)
  • Mains current and power monitoring (kW, kvar, kVA, pf) (DSE7320 MKII only)
  • kW and kvar overload and reverse power alarms
  • Over current protection
  • Unbalanced load protection
  • Independent earth fault protection
  • Breaker control via fascia buttons
  • Fuel and start outputs configurable when using CAN
  • 6 configurable DC outputs
  • 2 configurable volt-free relay outputs
  • 6 configurable analog/digital inputs
  • Support for 0 V to 10 V & 4 mA to 20 mA sensors
  • 8 configurable digital inputs
  • Configurable 5-stage dummy load and load-shedding outputs
  • CAN, MPU, and alternator frequency speed sensing in one variant
  • Real-time clock
  •  Manual and automatic fuel pump control
  • Engine pre-heat and post-heat functions
  • Engine run-time scheduler
  • Engine idle control for starting & stopping
  • Fuel usage monitor and low-fuel level alarms
  • Simultaneous use of RS232 and RS485 communication ports
  • True dual mutual standby using RS232 or RS485 for accurate engine hours balancing.
  • MODBUS RTU support with configurable MODBUS pages.
  • Advanced SMS messaging (additional external modem required)
  • Start & stop capability via SMS messaging
  • 3 configurable maintenance alarms
  • Compatible with a wide range of CAN engines, including tier 4 engine support
  • Uses DSE Configuration Suite PC
  • Software for simplified configuration
  • Licence-free PC software
  • IP65 rating (with supplied gasket) offers increased resistance to water ingress
  • Modules can be integrated into building management systems (BMS) using MODBUS RTU

KEY BENEFITS

  •  Automatically transfers between mains (utility) and generator (DSE7320 MKll only) for convenience.
  • Hours counter provides accurate information for monitoring and maintenance periods
  • User-friendly set-up and button layout for ease of use
  • Multiple parameters are monitored & displayed simultaneously for full visibility
  • The module can be configured to suit a wide range of applications for user flexibility
  • PLC editor allows users configurable functions to meet user-specific application requirements.

 

Related products
navigation

Giỏ hàng của bạn (0 sản phẩm)